LED Display USES Attention And Maintenance

- Sep 26, 2017-

     In order to make LED display life longer,In the use of the process not only need to pay attention to methods.With the extensive use of LED display, accompanied by the increasing use of the problem, a variety of objective and subjective factors, resulting in LED display life is reduced, can not work and other issues. Here,I first introduce the OPEN/OFF LED display should pay attention to some things.

    1.Switch sequence:Open:start up,after open screen.close:first off  screen,then turn off the computer.(If the computer doesnt first turn off the display, the screen will cause high body appears bright, burning lamp, serious consequences)

    2.ON/OFF display interval >5 minutes.

    3.After the computer enter the control software,can be open the screen.

    4.Avoid open the screen in full white screen mode, because the system has the maximum impact.

    5.Avoid open the screen in the runaway state(Including the computer doesnt enter the control software and other programs, the computer isnt powered, control part of the power isnt open).

    6.When the environment temperature is too high or the heat dissipation condition is not good, should be careful not to open the screen for a long time, should avoid use in strong thunderstorm.

    7.When the display one part of a line is very bright, it should pay attention to timely off the screen, should not be a long time to open the screen

8.When the display of the power switch is often tripped, it should promptly check the screen or replace the power switch.

9.Regularly check the firmness of the hook. If there is loosening, pay attention to timely adjustment, re-reinforcement or update hanging pieces.

10.According to the large screen display screen body, control part of the environmental situation, to avoid damage.